Hobby RG Premium Airbrush

Our Premium Airbrush features a 0.2mm nozzle and a MAC value for adjusting air pressure on the fly.

Perfect for finer detailed work such as figure painting and camouflage patterns.

How to paint:

1. Prepare the paint.
   Not all paint is airbrush-ready straight out of the jar. To spray properly, either use airbrush-specific paints such as Vallejo model air, SMS or MRP. To make other paints airbrush ready, generally, paint must be the consistency of milk. **Please refer to your paint manufacturers' literature for more specific information.
   
   
2. Pour paint into the paint cup - do not overfill!
   
   
3. Turn the compressor on.
   For most hobby use, air pressure of between 15-25 psi will suffice. Set the air pressure according to your needs or as per your paint manufacturers’ recommendation.
   
   
4. Operating the airbrush.
   The spraying pattern of your airbrush is dictated by the amount of air, amount of paint, and the distance the nozzle is from the workpiece.
   
   Your airbrush is a 'double-action' airbrush. What this means is that depressing the lever controls the amount of air, and pulling back on the lever controls the amount of paint.
   
   The distance the airbrush is from the workpiece also dictates the spraying pattern.

 To finish your airbrushing session:

1. Make sure your paint cup is empty and clean. never leave paint in the paint cup.
2. Depress the trigger on the airbrush so only air is coming out.
3. Holding down the trigger, turn the compressor off.
4. Release the trigger.